Avent Bathroom & Bedroom Thermometer 1U

How to Use: 1. Before bath time: Place the Philips Avent Bath and Bedroom Thermometer in the room to measure the ambient temperature. This helps ensure the room is comfortably warm for your baby. 2. For bath water: Fill the baby's bath with water. 3. Immerse the Thermometer: Gently place the thermometer into the bath water. Ensure it is fully immersed to get an accurate reading. The thermometer is designed to float. 4. Read the Temperature: Wait a few moments for the thermometer to stabilize. Check the digital display to read the water temperature. 5. Ideal Temperature: Aim for a water temperature between 36.5°C and 38°C (approximately 98°F to 100°F). Ensure the temperature does not exceed 39°C (approximately 102°F) for your baby's safety. 6. Adjust as Needed: If the water is too hot, add cold water. If it's too cold, add warm water. Always mix the water thoroughly and re-check the temperature before placing your baby in the bath. 7. After Use: Remove the thermometer from the water and dry it with a soft cloth. Store in a safe place.

Recommended Frequency: Use the Philips Avent Bath and Bedroom Thermometer every time you prepare a bath for your baby. You can also use it to monitor the room temperature regularly, especially in your baby's bedroom.

Additional Tips: Always supervise your baby during bath time.
Never leave your baby unattended in the bath.
Test the water temperature with your elbow or wrist in addition to using the thermometer to ensure it feels comfortable.
Keep the thermometer clean and dry when not in use to prolong its lifespan.
Ensure the battery compartment is securely closed to prevent water damage.
Replace the battery when the display starts to dim or becomes difficult to read.
Use the thermometer as a guide, but always trust your own judgment regarding your baby's comfort.