Tegaderm Roll 10cmx10m

Directions for Use: 1. Clean and dry the skin area where Tegaderm Roll will be applied. Make sure the area is free of oils and moisture.
2. Measure the required length of Tegaderm Roll needed to cover the desired area, allowing for overlap if necessary.
3. Carefully cut the measured length from the roll using clean scissors or a blade. 4. Peel away the paper backing from the Tegaderm Roll, exposing the adhesive side. Avoid touching the adhesive surface to maintain sterility.
5. Gently apply the adhesive side of the Tegaderm Roll to the skin, starting from one edge and smoothing it out to avoid wrinkles and air bubbles.
6. Ensure the film adheres firmly to the skin, especially around the edges. 7. Remove the printed frame from the film. 8. Monitor the application site regularly for any signs of irritation or infection.

Recommended Frequency: The Tegaderm Roll can be left in place for several days, depending on the condition of the skin and the level of exudate. Change the dressing if it becomes soiled, saturated, or if there are signs of infection. Regularly inspect the area beneath the film.

Additional Tips: To ensure optimal adhesion, avoid applying lotions or creams to the skin before applying Tegaderm Roll. If applying over a wound, follow your healthcare provider's instructions for wound care. If skin irritation occurs, discontinue use and consult a healthcare professional. When removing the Tegaderm Roll, gently peel it away from the skin, starting at one corner and pulling slowly in the direction of hair growth to minimize discomfort.