Bsn Medical Leukosan™ Strip 3x75mm 5 Strips

Directions for Use: 1. Clean and dry the wound thoroughly. Ensure the skin around the wound is free of dirt, debris, and oils. 2. Gently bring the edges of the wound together. 3. Apply the Leukosan™ Strip across the wound, perpendicular to the wound edges, ensuring it adheres to the healthy skin on both sides. 4. Apply additional strips as needed, spacing them approximately 1/8 inch (3mm) apart. 5. Smooth down each strip to ensure proper adhesion. 6. Avoid stretching the strips during application. 7. For longer wounds, cut the strips to the desired length.

Recommended Frequency: Leukosan™ Strips should be left in place until they begin to peel off naturally. This typically takes several days. Do not forcefully remove the strips. If the wound becomes wet or dirty, the strips may need to be replaced sooner.

Additional Tips: 1. Do not use Leukosan™ Strips on infected wounds, deep wounds, or wounds with jagged edges. 2. If the wound shows signs of infection (increased redness, swelling, pain, or pus), consult a healthcare professional immediately. 3. Avoid applying lotions, creams, or ointments directly under the strips as this may affect adhesion. 4. These strips are not a substitute for stitches for deep or complex wounds. 5. For best results, apply the strips to clean, dry skin free of hair. If necessary, carefully trim the hair around the wound before application. 6. Store in a cool, dry place.