Avent Microwave Steam Sterilizer Scf281/02

Instructions for use: 1. Pour 200ml/7oz of water into the sterilizer base.
2. Place the lower tray into the base. 3. Arrange teats and screw rings in the lower tray. 4. If sterilizing bottles, place them upside down on the lower tray, between the dome and the wall of the sterilizer. 5. Place the upper tray on top and arrange smaller items like soothers and breast pump parts. 6. Position the lid and close the two side clips. 7. Place the sterilizer in the microwave and heat according to the recommended times below: Microwave Wattage | Sterilization Time
1100-1850W | 2 minutes
850-1000W | 4 minutes
500-800W | 6 minutes
8. Allow the sterilizer to cool down for at least 5 minutes before opening.
9. Carefully open the sterilizer, avoiding contact with the hot steam. 10. Contents remain sterile for 24 hours if the sterilizer is unopened.

Recommended frequency: Sterilize feeding bottles, teats, and other accessories before each use, especially for newborns.

Additional tips: Always use the recommended amount of water.
Descale the sterilizer regularly to maintain its effectiveness. Use a descaling solution suitable for baby products or a mixture of water and white vinegar.
Never operate the microwave with the sterilizer empty.
Ensure the microwave turntable is able to rotate freely.
Check the sterilizer for wear and tear regularly and replace if necessary.
Allow the sterilizer to cool completely before handling or cleaning.